Unfortunately, I am not an expert at wildlife habitats or construction. Thankfully the resources at Conservation Station are innumerable. One resource rich area is Eco Web. Here guests can research habitats, local and national projects, and even speak with a Cast Member who can help you find information on what you are looking for. If you are not like me, you are not likely to carry a notebook and pen with you in the parks, and that is okay, because information at Eco Web can be printed. Eco Web provided me with a blueprint for a bat house, a backyard habitat that is easy enough for all of us to construct
BAT HOUSE
You will need six feet of 1 x 12-inch board and ten feet of 1 x 10-inch board. BOARDS CANNOT BE CHEMICALLY TREATED
Segment Dimensions (in inches):
A (Roof) – One 16 ½ x 11 ¼
B (Front) – One 18 ¾ x 9 ¼
C (Back) – One 27 x 9 ¼
D (Interior Ceiling) – One 9 ¾ x 9 ¼
E (Interior Partitions) – Three 9 ¼ wide x 8 high
F (Interior Partitions) – Two 9 ¼ wide x 14 high
G (Sides) – Two 11 ¼ wide x 27 (at back)/18 ¾ (at front)
Spacing between the partitions should be constant throughout.
All inner surfaces of the bat house should allow bats to get a firm foothold. Face the rough side of the lumber inwards, and carve small horizontal grooves at ½ inch intervals on the partitions' smooth sides.
Apply a bead of silicone caulk along all exterior joints to prevent heat loss and increase the probability of occupancy.
Place the house 10 – 15 feet above the ground. On the side of a building or pole works bests, trees are poor places for bat houses due to the threat of predators.
Placement should allow the bat house to face east or southeast, in order for the house to catch the morning sun.
Placement near a natural water source will also improve the possibility of inhabitation.
1 comment:
Wow - excellent! You learn something new every day :).
Post a Comment